Hosco fret slot saw 0,60mm

List of tools used in this video: StewMac Fret Slotting Miter Box: LP3BKL

Hosco fret slot saw 0,60mm The tang has small bumps or barbs on its sides The traditional way of affixing the frets to the fretboard is to cut the slots to the width of the tang without

List of tools used in this video: StewMac Fret Slotting Miter Box: LP3BKL

slot online games free Also, as a brief answer to this topic, the standard seems to be a 020 tang in a 023 slot So the slot should be 003 bigger than the tang

A slot width of 023 is recommended for this fret wire, but somewhat wider may work if you use glue to set the frets in Be sure to measure the width

fret slot depth We can create any scale you need! A short list of the more standard ones are here: 20 to 24 fret slot are typical but more or less are available on custom jobs

Our fretwire is sized to fit a fret slot width Fretwire is made in a variety of crown heights Note that after the frets are installed and